Uncle Sam's Electric service vans on a residential street in Waco, Texas
Waco, Texas · McLennan County

Wired right.
Done once.

Family-owned, master-licensed electricians serving Central Texas. Residential and commercial electrical service, whole-home generators, EV chargers, and 24/7 emergency dispatch — answered by a real human.

Master licensed · Bonded · Insured · TECL 40891

Licensed in TexasFamily-Owned · Waco, Texas24 / 7 Emergency DispatchMaster Electrician On StaffFully Insured & BondedPermits Pulled · Codes MetSame-Day Service AvailableLicensed in TexasFamily-Owned · Waco, Texas24 / 7 Emergency DispatchMaster Electrician On StaffFully Insured & BondedPermits Pulled · Codes MetSame-Day Service AvailableLicensed in TexasFamily-Owned · Waco, Texas24 / 7 Emergency DispatchMaster Electrician On StaffFully Insured & BondedPermits Pulled · Codes MetSame-Day Service Available
Job process · 02

How we run
the job.

We hand this card to every new client. It's the order of operations we will not skip — whether you called for a buzzing outlet or a 200-amp service.

StandardEstimate · Permit · Warranty
  1. 01

    Pick up the phone.

    A real human in Waco — not a call center. We'll diagnose over the phone if we can, schedule if we can't.

  2. 02

    Walk the job, in writing.

    On-site assessment with a written, line-item estimate. No vague 'time and materials.' No surprises on the invoice.

  3. 03

    Pull the permit.

    Every panel, service, and structural circuit gets permitted and inspected. It's slower. It's right.

  4. 04

    Run it like our own house.

    Square boxes. Labeled wires. Vacuumed drywall. Photographs in a closeout PDF. The way it should look.

  5. 05

    Stand behind it.

    Two-year workmanship warranty on everything we touch. One call brings us back. No paperwork.

Who answers · 03

We answer the phone. We pull the permit. We leave it cleaner than we found it. That's the whole job.

S

Sam Cunningham

Master Electrician · Owner

By the numbers

  • Years operating in Waco
  • Service calls completed
  • 100%Permitted & inspected
  • 2 yrWorkmanship warranty
  • 24/7Emergency dispatch
Master licenseTECL 40891
Service area · 04

Waco-based.
Fast around McLennan.

We're based on Buster Chatham Road and we keep our trucks close to home. If your zip starts with 766, 767 or 765, we're already on the way.

Dispatch base

1274 Buster Chatham Rd

Most service calls stay inside a practical 30-minute radius, so the truck, parts, and electrician are close.

On call

24/7

Common ZIP starts

767766765
Electrical resource center

Local guidance, not generic guesswork.

A practical map for repairs, projects, service areas, and the details that make an estimate usable.
  1. 01Uncle Sam's Electric handles residential, commercial, rural, and light industrial electrical work from a Waco base. The work starts with practical diagnostics: what the circuit serves, how the panel is labeled, whether the load is correctly sized, and whether the repair needs to account for weather, equipment, tenants, inspections, or future expansion.
  2. 02Home service calls often begin with symptoms such as tripping breakers, dead outlets, flickering lights, warm devices, old panels, storm damage, or equipment that will not stay powered. The right repair depends on whether the problem is a failed device, a branch-circuit issue, a grounding concern, a service-capacity limit, or a utility-side condition.
  3. 03Project work needs a different kind of planning. EV chargers, generator interlocks, panel upgrades, shop power, remodel wiring, kitchen circuits, bathroom fans, exterior outlets, and commercial lighting all benefit from a scope that names the route, load, access, permits, materials, and labeling before the first hole is cut.
  4. 04For property managers, churches, landlords, and small businesses, documentation matters as much as the repair. A useful electrical visit should leave behind clear notes about what was tested, what changed, what remains limited, and which circuits or panels should be watched during future maintenance or tenant turnover.
  5. 05Central Texas work also has local patterns: older Waco homes, rural outbuildings, hot summers, storm exposure, rental properties, farm equipment, restaurants, churches, and newer homes adding modern loads. Those conditions are why a local electrician page or guide can be more useful than generic electrical advice.
  6. 06The service-area and guide pages on this site are built to answer those practical questions before someone calls. They cover the towns, neighborhoods, and electrical topics customers ask about most often, with plain guidance on what to photograph, what to describe, and when a licensed electrician should handle the work.
  7. 07If a problem involves heat, smoke, arcing, water exposure, partial power, damaged service equipment, or a breaker that will not stay reset, the safer path is to stop using the affected equipment and call for help. The resource pages can help explain the terms, but urgent electrical symptoms deserve real-time professional judgment.
  8. 08For non-urgent work, the best first call is specific. Share the address, the goal, the panel location, photos from a safe distance, any appliance or equipment labels, and the timeline you are working around. That information helps Uncle Sam's Electric decide whether the job is a repair, an upgrade, a diagnostic visit, or a project that needs permit and utility planning.
  9. 09That same structure also helps search engines understand the site: one licensed Waco electrical contractor, a clear service area, direct contact details, topic-specific guide pages, and city pages that connect back into the main business instead of sitting as isolated sitemap URLs.
  10. 10The result is a site that is easier for people to read and easier for crawlers to classify.
  11. 11It also gives repeat visitors a clearer path back to the exact electrical issue or town page they need.

Repair signals

  • Tripping breakers, hot outlets, flickering lights, dead rooms, and storm damage need diagnosis before parts are replaced.
  • Photos from a safe distance help the electrician see panel type, device condition, labels, access, and signs of heat or water.
  • A good repair visit should end with clear notes, safe labels, and a short list of anything still worth watching.

Project planning

  • Chargers, generators, remodels, shops, appliance circuits, exterior power, and lighting all need load and route planning.
  • The cleanest scope names the panel path, material needs, permit timing, utility coordination, and what must be tested.
  • Planning early keeps finished walls, cabinets, concrete, and exterior surfaces from making simple electrical work expensive.

Local fit

  • Waco homes, rural properties, rentals, churches, restaurants, and small shops each create different electrical priorities.
  • Summer HVAC loads, storm exposure, older wiring, outbuildings, and tenant turnover all shape the right electrical answer.
  • Local service pages connect those details to the town, neighborhood, or property type instead of leaving every visitor on one generic page.
Field checklist for cleaner estimates
  • Name the exact symptom before asking for a price. Dead outlet, warm device, tripping breaker, dimming lights, and partial power each point to a different path.
  • Avoid resetting a breaker over and over. Repeated trips can mean overload, heat, damaged wiring, moisture, or equipment failure.
  • Take safe photos from outside the panel. Show the label, the main breaker, the affected area, and any discoloration or damaged cover.
  • List the equipment that was running when the issue happened. HVAC, dryers, ranges, freezers, pumps, tools, and chargers all matter.
  • Share recent changes. Storms, remodel work, appliance swaps, tenant move-ins, landscaping, and utility outages can all change the diagnosis.
  • For chargers, bring the charger model, vehicle needs, parking location, panel distance, Wi-Fi needs, and desired amperage.
  • For generators, list the circuits that must run, fuel type, placement limits, startup loads, and whether automatic transfer is needed.
  • For remodels, settle appliance locations, island layout, fan locations, lighting zones, switch locations, and inspection timing early.
  • For shops and outbuildings, list the largest tools, compressor load, dust collection, welder needs, lighting zones, and future equipment.
  • For exterior work, plan covers, boxes, conduit, trench route, GFCI protection, wet-location parts, and safe shutoff access.
  • For rentals, document tenant reports, turnover timing, safety devices, panel labels, and repeat issues that keep coming back.
  • For businesses and churches, name shutdown windows, emergency lighting, kitchen loads, sound equipment, exterior lighting, and panel access.
  • Ask what will be labeled when the work is done. Clear labels make future repairs faster and safer.
  • Ask what was tested. A repair should include more than a replaced part; it should confirm the circuit behaves correctly.
  • Ask what remains limited. A good electrician should say when the system works but still has age, capacity, access, or future-load concerns.
  • Keep a simple repair record with photos, date, scope, breaker locations, material used, and any recommended next step.
  • Do not hide junction boxes, bury unprotected splices, oversize breakers, or rely on extension cords as permanent wiring.
  • Call sooner for heat, smoke, buzzing, arcing, water exposure, partial power, or equipment that fails after a storm.
  • Use the local pages when address and utility context matter. Use guide pages when the symptom or project type matters most.
  • Use both when the work has a place and a topic, like a Woodway generator, Lorena remodel, Robinson shop, or Waco panel upgrade.
  • Good electrical work should be easy to inspect, easy to shut off, easy to label, and easy for the next owner to understand.
  • The goal is not just power today. The goal is a safer system that makes the next repair or upgrade less confusing.
  • When in doubt, describe the building first: home, rental, church, restaurant, shop, farm, office, or light commercial space.
  • Then describe the load: lighting, HVAC, appliance, charger, pump, tool, kitchen equipment, medical equipment, or backup power.
  • Use plain words for the symptom first: dead outlet, tripping breaker, flicker, warm device, partial power, failed light, or damaged equipment.
  • Write down the address, property type, access notes, gate codes, tenant timing, and the best place for the truck to park.
  • Take safe photos of the panel, the panel label, the affected device, the surrounding wall, and any visible damage.
  • Do not remove panel covers, device covers, or weatherproof covers just to take a better photo.
  • Note if the issue started after rain, wind, lightning, utility work, a remodel, a new appliance, or a tenant move-in.
  • List what was running when the issue happened, including HVAC, freezers, pumps, kitchen equipment, tools, or chargers.
  • Say whether the problem affects one device, one room, one side of the building, one subpanel, or the whole property.
  • For a breaker trip, write down how often it trips, what resets it, and whether it trips instantly or after a load runs.
  • For flickering lights, note whether the flicker is one fixture, one room, or the whole house.
  • For partial power, note whether large 240 volt appliances still work and whether neighbors have normal power.
  • For a hot outlet or switch, stop using the device and note the load that was plugged in.
  • For outdoor outlets, note rain exposure, cover condition, GFCI behavior, lawn equipment damage, and the nearest panel.
  • For EV chargers, collect charger model, vehicle needs, desired amperage, parking side, Wi-Fi needs, and panel distance.
  • For generators, list the circuits that must run, fuel type, transfer method, placement limits, and startup loads.
  • For kitchen remodels, gather appliance locations, island plans, countertop outlets, lighting zones, disposal, and dishwasher needs.
  • For bathroom remodels, gather vanity layout, fan location, lighting plan, heated floor specs, and GFCI requirements.
  • For shops, list the largest tool, compressor, dust collection, welder, lighting zones, and future 240 volt loads.
  • For barns and rural buildings, note pumps, gates, freezers, dust, animals, trench routes, and disconnect locations.
  • For restaurants, gather cut sheets for equipment, hood controls, refrigeration, POS locations, and emergency lighting.
  • For offices, note fixture counts, switch zones, desired light color, emergency lighting, and ceiling access.
  • For churches, include kitchens, classrooms, exterior lights, sound booth loads, stage lighting, and exit lighting.
  • For rentals, note tenant reports, repeat issues, turnover timing, smoke alarms, GFCI tests, and damaged devices.
  • Ask whether the work needs a permit, an inspection, or utility coordination before scheduling a large project.
  • Ask whether the quote separates diagnosis, repair, replacement, optional upgrades, and access work.
  • Ask what can safely stay as-is and what should be replaced because of age, heat, damage, or poor access.
  • Ask what will be labeled after the work is complete, especially panels, subpanels, disconnects, and new circuits.
  • Ask what will be tested under realistic load before the job is considered finished.
  • Keep repair notes with the date, photos, breaker locations, replaced parts, test results, and follow-up recommendations.
  • Do not rely on extension cords, hidden junctions, indoor-rated outdoor parts, oversized breakers, or unlabeled circuits.
  • Call sooner for heat, smoke, buzzing, arcing, water exposure, partial power, or damaged service equipment.
  • Use local pages when the town, utility, inspection path, or property type changes the plan.
  • Use guide pages when the question is about a symptom, device, project type, or safety concern.
  • Use both when the job has a place and a topic, like a Waco panel upgrade or a Lorena kitchen remodel.
  • A clean repair should be easy to inspect, easy to shut off, easy to label, and easy to explain later.
  • The best electrical work solves the current need without making the next repair harder.
  • The safest estimate is specific about what is known now and what still needs an on-site check.
  • Good closeout notes help owners, tenants, inspectors, property managers, and future electricians understand the system.
  • If a system is safe but close to capacity, plan the next large load before buying the equipment.
  • If a system is unsafe, the first goal is safe shutdown and diagnosis, not a cosmetic fix.
  • If you are unsure which page to read, start with the symptom, then narrow by town or project type.
  • For any project, ask who is responsible for drywall, trenching, patching, access panels, paint, or equipment mounting.
  • For panel work, ask where the main disconnect is, what the service size is, and whether the meter base is being touched.
  • For subpanels, ask about feeder size, grounding, neutral separation, labeling, and future circuits.
  • For GFCI problems, note whether protection is at the device, breaker, upstream outlet, spa panel, or exterior disconnect.
  • For AFCI trips, list corded devices, recent fixture changes, dimmers, electronics, and any pattern in the trip timing.
  • For lighting controls, decide if you need simple switches, dimmers, occupancy sensors, timers, photocells, or smart controls.
  • For landscape lighting, plan transformer location, wet-rated splices, control method, fixture count, and service access.
  • For parking lot lights, note pole count, failure pattern, timer settings, photocell location, and lift access.
  • For smoke alarms, note alarm age, bedroom locations, interconnection, carbon monoxide needs, and nuisance chirp patterns.
  • For low-voltage devices, check transformer ratings, wire condition, chime compatibility, Wi-Fi location, and mounting needs.
  • For backup medical power, list device wattage, required runtime, battery backup, essential circuits, and transfer method.
  • For annual maintenance, test GFCIs, check exterior covers, review panel labels, look for heat marks, and listen for buzzing.
Ready when you are

One call.
We bring the truck.

Estimates are free. Diagnostics are flat-rate. Emergency dispatch runs around the clock — including the day you needed power for the brisket.

  • HoursMon–Fri · 7:00–18:00
  • SaturdaySat · 8:00–14:00
  • Emergency24 / 7 Emergency Dispatch
  • Address1274 Buster Chatham Rd, Waco, TX 76705
  • LicenseTECL 40891